remote-code-bridge

Run code . on a Linux machine you reached through SSH, and that directory opens in VS Code on your Windows, macOS, or Linux machine.

Disclaimer: this project, its code, tests, and documentation, was written by AI coding agents. Read the code and the security notes before you rely on it.

remote: code .  →  SSH tunnel  →  bridge on your machine  →  code --remote ssh-remote+devbox /remote/path

uv tool install remote-code-bridge
remote-code-bridge install devbox

Features

• Works from Windows, macOS, and Linux. Your machine (where VS Code runs) can be any of the three; the remote is any Linux box you reach over SSH.
• Every SSH session works, however many you open. Open ten terminals to the same remote, close them in any order, let VS Code's own Remote-SSH connection come and go: code . works in all of them. No more "remote port forwarding failed for listen port" errors.
• Heals itself. One small bridge on your machine owns the tunnel, not any single terminal. After sleep, Wi-Fi changes, a dropped connection, or a remote reboot it reconnects on its own (dead links are noticed within about 45 seconds) and clears any leftover from the old connection first.
• Handles bursts. Many code commands at the same moment queue up for an instant instead of failing.
• Feels like the real code. code ., code some/dir, code -r / --reuse-window, code -n / --new-window, code -g file:line / --goto. Relative paths and .. are resolved on the remote.
• Installs like any Python tool. uv tool install remote-code-bridge (or pip install) from PyPI. One command then sets up the remote, and the remote only needs python3.
• Your choice of how it runs. Let it start at login as a background service (a systemd user service on Linux, a launchd agent on macOS, a Scheduled Task on Windows that keeps running on battery with no time limit), or run remote-code-bridge serve yourself when you want it.
• Uninstalls without a trace. Each machine keeps a record of exactly what was installed: files, folders it had to create, lines added to shell startup files, the service. remote-code-bridge uninstall removes exactly that, on both machines, and leaves everything that was there before.
• Knows your aliases. Finds a reachable Linux remote in your ~/.ssh/config (following Include files), asks which one when several different remotes are reachable, and treats aliases that reach the same machine (say devbox and devbox.lan) as one. ProxyCommand/ProxyJump jump hosts are fine.
• Leaves your SSH config alone. Nothing is added to ~/.ssh/config. Installations from version 1 are cleaned up automatically.
• Private by design. The bridge listens only on your machine's 127.0.0.1. On the remote, the tunnel is a socket in a directory only your account can open. Every request carries a random 64-character token that never appears on a command line. VS Code is started without a shell, and only safe flags are passed through. See Security.
• Tiny and dependency-free. Plain Python 3.8+, standard library only.

Requirements

• Your machine: Python 3.8+, uv (or pip), OpenSSH, VS Code with its code command in PATH, and the Remote - SSH extension.
• The remote: Linux with python3 3.8+.
• SSH login without a prompt from your machine to the remote: a key without a passphrase, or your key loaded into ssh-agent (ssh-add; on Windows start the OpenSSH Authentication Agent service first). The bridge connects by itself, so it can't type a password.

Install

uv tool install remote-code-bridge
remote-code-bridge install devbox

Replace devbox with your SSH alias from ~/.ssh/config, or leave it out to let the installer find a reachable Linux alias. It asks whether to start the bridge automatically when you log in; answer up front with --service or --no-service. It then checks end to end that code . will work.

Then, in any SSH session on the remote:

cd ~/project
code .

If you chose not to install the service, keep remote-code-bridge serve running on your machine while you work.

<summary>Without uv</summary>

python3 -m pip install --user remote-code-bridge
remote-code-bridge install devbox

pipx install remote-code-bridge works too. To pin a version, install remote-code-bridge==2.1.0. To run unreleased code, install git+https://github.com/kshitizwagle/remote-code-bridge instead.

What installation sets up

Re-running remote-code-bridge install is always safe: it keeps your token, settings, and service choice.

Everyday commands

remote-code-bridge status        # either machine: is the bridge running, is the tunnel up?
remote-code-bridge serve         # run the bridge yourself (if you didn't choose the service)
remote-code-bridge update        # upgrade the package, update the remote, restart the service
remote-code-bridge uninstall     # remove everything it installed, here and on the remote

update asks PyPI for the latest release and, if it is newer than what you run, installs it with whatever installed it (uv or pip), then re-runs install for the saved alias. Prefer it to uv tool upgrade remote-code-bridge, which upgrades only your machine: the remote keeps the old version until you run remote-code-bridge install again. An installation from the GitHub URL moves to PyPI on its first update. On Windows it finishes in a new window, because a running program can't replace its own files there.

uninstall lists what it will remove and asks before doing it (--yes skips the question). It removes the service, then the remote side over SSH, then your machine's side. If the remote can't be reached it stops and changes nothing; --host-only cleans just your machine (then run ~/.local/bin/remote-code-bridge uninstall on the remote yourself). The program itself is uv's or pip's to remove, and the last step tells you how:

uv tool uninstall remote-code-bridge

Coming from version 1: install with uv tool install --force remote-code-bridge (--force replaces the old remote-code-bridge command), then run remote-code-bridge install. It keeps your token and removes version 1's RemoteForward include from ~/.ssh/config.

Troubleshooting

Logs: ~/.local/state/remote-code-bridge/bridge.log (Linux), ~/Library/Logs/remote-code-bridge.log (macOS), %LOCALAPPDATA%\remote-code-bridge\bridge.log (Windows).

How it works

1. The bridge listens on 127.0.0.1:39731 on your machine and keeps one SSH connection to the remote: ssh -N -R ~/.cache/remote-code-bridge/bridge.sock:127.0.0.1:39731 devbox. That puts a Unix socket on the remote, in a directory only you can open, that leads back to the bridge.
2. code . on the remote resolves the path, notes whether it is a folder, and sends an authenticated POST /open through that socket.
3. The bridge checks the token, alias, path, and flags, then starts code --folder-uri vscode-remote://ssh-remote+devbox/path (or --file-uri) without a shell.

See Architecture and Security for details.

Development

uv run --with pytest --with pytest-cov python -m pytest   # unit and integration tests (fake ssh, no network)
uvx ruff check . && uvx ruff format --check .
./scripts/smoke-test.sh                       # the single-file copy sent to remotes: serve + code
./scripts/native-linux-install-update-test.sh # Docker, real sshd: install, sessions, update, uninstall
uv tool install --force .                     # try your working copy as the real command

Run the pieces by hand without installing (REMOTE_CODE_BRIDGE_TUNNEL=0 skips the SSH tunnel; the client then uses TCP 127.0.0.1:PORT):

export REMOTE_CODE_BRIDGE_TOKEN="$(python3 -m remote_code_bridge generate-token)"
REMOTE_CODE_BRIDGE_DRY_RUN=1 REMOTE_CODE_BRIDGE_TUNNEL=0 REMOTE_CODE_BRIDGE_DEFAULT_HOST=devbox \
  python3 -m remote_code_bridge serve
# another terminal, same token:
REMOTE_CODE_BRIDGE_HOST_ALIAS=devbox python3 -m remote_code_bridge open .

Configuration lives in ~/.config/remote-code-bridge/host.env and remote.env; non-empty REMOTE_CODE_BRIDGE_* environment variables override them. Don't set a different REMOTE_CODE_BRIDGE_TOKEN in your shell for an installed setup; it would override the saved one.

Releases: bump version in pyproject.toml and __version__ in remote_code_bridge/__init__.py (a test fails if they differ), then push a v* tag (or use Actions → release → Run workflow). The workflow tests that commit, checks both versions match the tag, builds with uv build, publishes to PyPI through trusted publishing, and attaches the wheel and sdist to a GitHub release. Users get it with remote-code-bridge update, which only ever installs published releases. To test unreleased changes end to end, run RCB_PACKAGE_SPEC=/path/to/checkout remote-code-bridge update.

License

MIT